HEMPEL
Description
A high performance universal pure epoxy primer for atmospheric or in-water service, including water ballast tanks to be coated according to IMO-PSPC requirements defined in the IMO Resolution MSC.215(82).
Volume Solid
80 ± 2
Typical DFT
100–250
Description
A high performance universal epoxy primer for atmospheric or in-water service, including water ballast tanks and cargo oil tanks.
Volume Solid
72 ± 2
Typical DFT
100–200
Description
A heavy duty pure epoxy coating for areas exposed to abrasion and aggressive corrosive climate such as ramps, ship hulls and holds of bulk carriers. Abrasion Resistant Ice Coating recognized by Lloyds Register.
Volume Solid
79 ± 1
Typical DFT
125–250 / 150–300
Description
A high build, aluminium pigmented pure epoxy primer for immersion and splash-zone service.
Volume Solid
70 ± 1
Typical DFT
150–300
Description
An economical pure epoxy primer for atmospheric or in-water service. Especially suited for cargo holds.
Volume Solid
72 ± 2
Typical DFT
100–200
Description
A low temperature curing epoxy primer that can be applied under humid conditions and damp steel surfaces. Well suited also as a blast primer in epoxy systems and in mist coat on zinc silicates (GALVOSIL).
Volume Solid
54 ± 1
Typical DFT
50–125
Description
A blast primer for heavy duty epoxy systems on submerged and non-submerged areas according to specification.
Volume Solid
44 ± 1
Typical DFT
30–60
Description
A maintenance and repair primer suited for application even under humid conditions and on marginally prepared surfaces. It is especially recommended on corroded surfaces and for spot repair in e.g. water ballast tanks, cargo holds and decks.
Volume Solid
97 ± 1
Typical DFT
150
Description
An abrasion resistant and high-build pure epoxy primer that is recommended for ballast water and cargo oil tanks coated according to IMO-PSPC requirements. Suitable for application at low temperatures.
Volume Solid
84 ± 1
Typical DFT
125–350
Description
A high build and abrasion resistant coating for concrete, steel or glass flakes for areas subject to mechanical and chemical resistance. Complies with the requirements of NORSOK M501 system 7A/B and ISO 12944-9:2018.
Volume Solid
87 ± 3
Typical DFT
350–500